Equipment and Ammunition

A BB gun is any shoulder held smoothbore BB gun with metallic sights, in which the propelling force is developed through the use of a compressed spring, gas or compressed air.

No alterations of factory manufactured BB guns may be made except as provided in these rules.

Only factory manufactured parts designed for the specific model gun being fired may be used.

Parts in the gun may not be removed and all parts must be in their correct position and functioning in their designed manner.

Electronic triggers are not allowed.

Internal parts may be honed or polished to improve their intended function, but such improvements may not alter their intended function.

Guns must operate safely.

Audible timing devices are not allowed.

A single layer of tape or non-glare paint may be placed on the barrel for the purpose of reducing glare.

No other external modifications are permitted except as provided in these rules.

Factory installed stocks may be altered in length.

When shortening or lengthening a stock, the butt must be identical to the original equipment.

The butt of the stock may be roughed, checkered, or scored to provide a non-slip surface.

No further modification to the stock is allowed.

Material such as sandpaper, emery paper, adhesives, rubber or rosin may not be added to any portion of the stock or forearm.

Stocks may be repainted or left unfinished.

Hook butt plates or thumbhole stocks are not permitted.

Metallic receiver sights, from any manufacturer may be substituted for factory sights and mounted on the receiver of the gun.

Adjustable rear-apertures and eye cups are not permitted.

A blinder for the non-shooting eye may be attached to the rear sight.

A hooded front sight with interchangeable inserts may be used, however, no portion of the front sight may extend past the end of the barrel.

Ground cloths or mats with maximum dimensions of 1.25 x 2 meters (49.2 x 78.7 inches) in size and a maximum total thickness of 5 cm (1.9 inches) may be used.

Ground cloths must not be constructed or used in a manner to provide artificial rest or support.

Ground cloths shall not be used in standing.

All clothing must be made of loose fitting, non-binding material.

All linings, padding and reinforcements must be the same specifications.

Lining and padding must not be quilted, cross-stitched, glued, or otherwise affixed to the outer layer other than at normal tailoring points.

The use of any special devices, means or garments which support or immobilize the shooter's legs, body, or arms is prohibited.

A button or safety pin may be used on the sleeve to aid in holding the sling in place on the upper arm part of the shirt.

Shooting jackets - No jackets are permitted.

Shooting trousers - Trousers designed for shooting are not permitted. Only loose fitting trousers, loose fitting sweat pants, or loose fitting jeans are permitted.

Gloves - Gloves may not be worn.

Sweatshirt - A maximum of two unaltered sweatshirts may be worn during firing. Special shooting sweaters are not permitted. One loose-fitting t-shirt is allowed. Compression garments are not allowed.

Shoes - Normal street type or light athletic shoes are permitted so long as they do not exceed the top of the ankle. Shooting boots/shoes are not permitted. Shoes must be a matched pair.

Pads - No pads, braces, or elastic bandages will be allowed.

Eye Patches - Eye patches are allowed.

Weights may be added internally to either the fore-end or to the butt of the stock.

No weights may be added to the shot tube or barrel.

The total weight of an unloaded BB gun may not exceed 6 lbs., excluding the sling.

Slings not exceeding 1 1/4 inches in width, with movable keepers are permitted in the prone, sitting, and kneeling positions.

Sling cuffs and pads are prohibited.

Sling keepers or fasteners used as sling keepers that can be tightened by mechanical means are permitted.

Slings are to be attached to the BB gun at a fixed attachment point on the forearm.

The forearm may have up to four holes that will accept a screw for the sling attachment. No other type of adjustable sling attachment is permitted.

Only one cylindrical roll for shooting in the kneeling position is allowed.

The kneeling roll may be a maximum of 25cm (9.84 inches) long and 18cm (7.08 inches) in diameter, and made of soft and flexible material.

Binding or using other devices that change the shape of the roll from a cylinder is not permitted.

The use of the kneeling roll is optional and not required.

Only round .177 (4.5mm) lead or steel BBs are permitted.

All devices or equipment which may facilitate shooting and which are not mentioned in these rules, or which are contrary to the spirit of these rules are prohibited.

The Match Director, Official Referee, or Jury Chairman has the right to examine a competitor's equipment and apparel.

It is the competitor's responsibility to submit questionable equipment and apparel for official inspection and approval prior to the beginning of the match.

All competitors and other personnel in the immediate vicinity of the range complex are urged to wear eye protection devices.

Specially made shooting glasses with adjustable lens for target shooting are prohibited.